CRVpro 16 with Explosion Proof Motor 3166E-01

CRVpro16 XPRF vacuum pump is a two-stage direct-driven vacuum pumps with an explosion proof motor. The motor is cUL listed (E485334) for use in class I and class II locations

Class I locations are areas where flammable gasses are present such as chemical plants, oil refineries, gasoline storage/dispensing areas, and gas manufacturing plants.

Class II locations are areas where there is dust which is or could be flammable when aerosolized.

The CRVpro 16 pump with explosion proof motors comes with the following key features:

• Reduced risk of chemical attacks and oil breakdown by diluting chemical vapors with a larger oil chamber.
• Slowing down corrosion by cool running operation.
• Provides a measure of protection from sublimed chemical vapors with coating on pump module and oil case.

These benefits lead to extended service interval.

Available on request are CRVpro 16 pump with explosion proof motors can be prepared with perfluorpolyether fluid(PFPE). Contact us for more information.

•Consumes up to 36% less oil than comparable pumps.

•Runs 10°C cooler than comparable pumps. Slows corrosion.

•Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals.

•Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. •Available in 115V/208-230V, 60Hz.

•Free air displacement @60Hz: 12.8 cfm (363 L/min)

•Ultimate pressure: 3x10-3 mbar (2x10-3 Torr)

As with all vacuum pumps with explosion proof motors, conduit wiring to an explosion proof control panel is required. Always use a certified electrician for proper installation of vacuum pump to meet your local municipal codes.